How to use IPECS 50
call now: 1300 123 747

How to use IPECS 50

  How to make a Call  
  To call an outside number: Dial 0 access code for 1st available line  
  To call another station:
Dial telephone number Dial station number or press programmed DSS Key  
  How to Answer a Call  
  Lift handset or press Speaker  
  How to Transfer a Call  
  Press Trans/Pgm & dial ext no. Or press DSS key
Announce caller [optional] Replace handset
  How To Park Calls  
  Press Trans/Pgm button
Dial 601-610 or press programmed DSS key
Replace the handset
  To Retrieve Parked Calls  
  Dial 601-610 or press programmed DSS key  
  Placing a call on hold  
  System Hold: Press Hold/SaveButton once  
  Exclusive Hold: Press Hold/Save Button twice  
  Retrieving a held call  
  Press flashing line or call key  
  Internal All Call Page #3 Lift handset, Dial Paging Code or  
  External Page #5 press programmed flex key  
  Directed Call Pick-up  
  To Answer Call ringing at another station Dial *7 & ringing station number or dial *7 & press programmed DSS key  
  Group Call Pick-up  
  To Answer unattended Phone within your group Press Soft Key OR Dial **  
  Last Number Redial  
  The last 100 dialled & received calls are listed. Press the Log button (soft key). When last number is displayed, Scroll up and down using the navigator wheel. When number has been located, press Send button to dial.  
  Do Not Disturb  
  To turn this feature on or off Press DND button  
  *Ring Type  
  To Change Ring Type Press TRANS/PGM button and dial 1
Dial 1 – 1 Intercom Ring
Dial 2 – 2 External Ring
Dial ring tone no’s 1-8 Once ring tone has been chosen, press Hold/Save
  Call Forward
To direct calls that come to your telephone to another extension when your telephone is busy and/or when you are unable to answer your telephone
  1. To Set Call Forward Pickup Handset or press speaker Dial 554  
  2. Select Forward Type Dial
1- Unconditional
2- On Busy
3- No Answer
4- Busy/No Answer
  3. Choose fwd Destination
Internal Forward OR
External Forward
Dial extension number or
Press DSS btn or
Dial Hunt Group no. for voicemail
Press Speed Button and dial speed bin number
  To Cancel Call Forward  
  Dial 554 #  
  To Place a Callback Call busy extension, Press MSG then hang up.
When busy extension hangs up, you will be signalled. Answer the signal by lifting the handset or pressing Speaker, the station you called will be signalled
  To Establish a 3-Way Conference Call desired party, press Conf button (Soft Key), the called party is put on exclusive hold. Call the next party, press Confbutton twice.  
  Station Speed Dial
To make a personal directory of the 20 external numbers that you call most often
  To program Press Dirbutton (Soft Key)
Press Speed button (Soft Key)
Press Add button (Soft Key)
Dial speed number bin 00-19
Dial ‘0’ Dial phone number to be stored Press
Hold / Save button Enter name for dial by name Press
Hold / Save
  System Speed Dial
Depending on the size of your Aria System, you can store up to 800 frequently called telephone numbers. These numbers may be accessed by all extensions in the system.
  Program From Attendant Station Only Press Dirbutton (Soft Key)
Press Speed button (Soft Key)
Press Add button (Soft Key)
Dial speed bin no. 200-999
Dial ‘0’ Dial phone number to be stored Press
Hold/Save button Enter name for dial by name
Press Hold/Save
  To Dial Press DIR, Press SPEED
Dial relevant bin number
  To Erase Press DIR, Press SPEED
Dial Bin number to be erased Press Add, dial bin no. Press Hold/Save button
  Codes for Storing Dial by Name A=2 B=22 C=222 D=3 E=33 F=333 G=4 H=44 I=444 J=5 K=55 L=555 M=6 N=66 O=666 P=7 Q=77 R=777 S=7777 T=8 U=88 V=888 W=9 X=99 Y=999 Z=9999 Space = right arrow on wheel Backspace = DND button  
  Phone Directory  
  To Scroll through phone directory Press DirbuttonSelect one of the following: Dial
1. Private (personal)
a. Public (system)
b. Station View (stn no’s)
Scroll up and down using the navigator. When the appropriate name has been located, then press the OK or Send button (soft key) to dial number
  *Program Flexible Button  
  STEP 1. Press Trans/Pgm buttonPress Flexible button  
  STEP 2. Choose relevant code
Station Numbers - DSS Call Park
Speed Dial Number
Dial Station No. & Hold/Save
Dial 601-610 & Hold/Save
­­­­­­­­­­­­­­­­­­­Speed + Bin No. & Hold/Save

  STEP 3 Press Speaker button to exit programming mode  
  System Clock Set  
  Prgram from the Attendant Station only Press Trans/Pgm ButtonDial 041
Press Hold/Save Button
Enter Time as HHMM (24 hr clock) eg: 1435 = 2.35pm Press
Hold/Save Button
  Naming Stations  
  Prgram from the Attendant Station only Press Trans/Pgmbutton.
Dial 071 Enter Station Number
Enter name using key pad Press
Hold/Save button

Join Our Newsletter

Signup to get the latest updates by joining our newsletter program below.

Contact Us

10/131-147 Walker St, Dandenong Victoria 3175, Australia
 (03) 9708 9888 / 1300 123 747
 (03) 9708 9811
Email  This email address is being protected from spambots. You need JavaScript enabled to view it.


S5 Box